Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volvo
  4. :
  5. V90
  6. : How to reset the maintenance light on the 2019 Volvo V90.

Volvo V90 - Video tutorial

Model: Volvo V90 MK 1 - Years 2016-2023
Part: Instrument cluster
Operation: How to reset the maintenance light on the 2019 Volvo V90.

If you want to manually reset the maintenance light that comes on in the instrument panel of your Volvo V90 (year 2019), all you have to do is follow these steps. First, enter the cabin and make sure the instrument panel is turned off. At this point, locate the buttons with the directional arrows located on the left side of the steering wheel. Press and hold the button with the down arrow while simultaneously turning on the instrument panel. Wait a moment, and as soon as the panel stops flashing, release the button.


Posted on 4 November 2023 by ScegliAuto



How do you reset the Service light on the Volvo V90?
Volvo V90 (2016-2023 / MK 1) To reset the Service light on the Volvo V90, you need to turn on the car's instrument panel so that you can access the menu on the instrument panel.
How to remove the rear door panel of the Volvo V90
Volvo V90 (2016-2023 / MK 1) Let's find out in this short and simple guide how to remove and replace the rear door panel of the Volvo V90. First of all, we open the rear door of
How to replace the key battery on the Volvo V90
Volvo V90 (2016-2023 / MK 1) If we want to replace the battery of the car remote control key, it is necessary to follow the following steps: take the remote control, slide the re

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos