Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in a Volvo V40?

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Service warning light

In this tutorial, you will see how to reset the service light in a Volvo V40, an extremely simple and quick operation to perform only after completing all required scheduled maintenance tasks. First, enter the cabin, then insert the key and press the "Start/Stop" button once. Next, hold down the "OK" button at the end of the left control lever, turn on the ignition, and keep the button pressed until the yellow "i" light starts flashing. Then restart the vehicle.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service reminder on the Volvo V40
Resetting the service reminder on the Volvo V40
Volvo V40 (2012-2019 / MK 2) These short and simple steps will show us how to reset the maintenance reminder (service) on the Volvo V40. In order to reset the service, it is nece…
How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) On the Volvo V40, to reset the Service light, turn on the instrument cluster by turning the ignition key in the ignition switch, then press and hold …
Resetting the Service Light on a Volvo V40
Resetting the Service Light on a Volvo V40
Volvo V40 (2012-2019 / MK 2) This guide shows the main steps to reset the service light for the regular oil change maintenance on a Volvo V40. First, get inside the vehicle and t…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos