Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S60
    4. : Resetting the Volvo S60 Service warning light.

Volvo S60 - Video tutorial

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Checks and maintenance
Operation: Resetting the Volvo S60 Service warning light.

To remind us when to perform the service on the Volvo S60, a warning message appears on the instrument panel. After completing all the required operations, we need to proceed with resetting the control system. Sit in the driver's seat and turn the ignition key to position one. Press and hold the button located at the bottom left of the speedometer. Turn on the instrument cluster and wait until you see the orange triangle-shaped warning light flash three times. Release the button and turn off the instrument cluster. Upon the next restart, we will verify the reset.


Posted on 5 December 2023 by ScegliAuto

    Frequently Asked Questions

    • S60 2010-2018 - What does the engine failure warning light on the dashboard of the 2010 Volvo S60 mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos