Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Average Fuel Consumption of the Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Warning light – error code

In this new guide dedicated to your first-generation Volvo XC60 (model years 2008-2016), discover how to manually reset the average fuel consumption display. First, insert the key and turn on the ignition. Next, use the small knob located on the left stalk of the steering wheel to navigate through the onboard computer menu and find the average fuel consumption option. At this point, press and hold the "Reset" button and release it as soon as the reset is successfully completed. Finally, turn off the ignition and you are done.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on a Volvo XC60
How to Replace the Fuel Filter on a Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Today, follow these step-by-step instructions to remove and replace the fuel filter on a Volvo XC60. First, raise the vehicle and start by removing t…
How do you replace the diesel fuel filter of the Volvo XC60?
How do you replace the diesel fuel filter of the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In order to replace the fuel filter of the Volvo XC60, it is necessary to lift the car using a jack at the rear, in order to access the components be…
How to Replace the Diesel Fuel Filter on a Volvo XC60
How to Replace the Diesel Fuel Filter on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) In today's video, see how to replace the diesel fuel filter on the first generation Volvo XC60. First, lift the vehicle on a lift. Now locate the fil…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos