Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulbs

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Headlight bulb

To replace the bulbs, you need to completely remove the front headlight assembly. Open the hood and remove the two metal clips securing the headlight. Carefully pull the headlight assembly out from its housing. Remove the protective cap and then the electrical connector by unscrewing the side screws. Remove the bulb retaining spring by gently pulling it to detach it from the socket. Install the new bulb without touching the glass with your hands. Reinstall the bulb socket in its respective housing and reposition the headlight assembly, securing it with the two clips after closing the plastic cap.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Turn Signal Bulb in the Front Headlight of the Volvo XC90
How to Replace the Turn Signal Bulb in the Front Headlight of the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today's instructions will allow you to disassemble and replace the turn signal bulb in the front headlight of the Volvo XC90. First, open the hood of…
Replacing the Front Headlight Bulbs
Replacing the Front Headlight Bulbs
Volvo Xc90 (2002-2014 / MK 1) This video shows how to change one of the bulbs in the front headlight of a Volvo XC90 or, if necessary, how to replace the entire headlight. First, …
How to Replace the Headlight Bulb on a Volvo XC90
How to Replace the Headlight Bulb on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) To perform this simple task, first release the hood using the latch, then lift it and secure it with the prop rod. This will give you access to the b…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos