Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Fog Light

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fog lights

See other generations:
Video tutorial

To facilitate disassembly, it is recommended to lift the vehicle on a hoist: the fog light bulb is accessed from inside the bumper. Disconnect the connector attached to the bulb holder by pressing the locking tab and rotate the bulb holder counterclockwise to remove it. To remove the fog light, simply unscrew the three mounting screws located at the back.

Once the fog light is removed, you can replace it with the new one by positioning it in its place and tightening the corresponding mounting screws. Finally, reconnect the connector to the bulb holder.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacing Front Fog Light Bulb on Volvo XC-90
Replacing Front Fog Light Bulb on Volvo XC-90
Volvo Xc90 (2002-2014 / MK 1) In this tutorial video, you will learn how to remove and replace the front fog light bulb on a Volvo XC-90. First, lift the vehicle and access the ba…
How to Replace the Turn Signal Bulb in the Front Headlight of the Volvo XC90
How to Replace the Turn Signal Bulb in the Front Headlight of the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today's instructions will allow you to disassemble and replace the turn signal bulb in the front headlight of the Volvo XC90. First, open the hood of…
Replacing the Front Headlight Bulbs
Replacing the Front Headlight Bulbs
Volvo Xc90 (2002-2014 / MK 1) This video shows how to change one of the bulbs in the front headlight of a Volvo XC90 or, if necessary, how to replace the entire headlight. First, …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos