Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Headlight Bulbs

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

This video shows how to change one of the bulbs in the front headlight of a Volvo XC90 or, if necessary, how to replace the entire headlight. First, open the hood.

Remove the metal clips and take out the entire headlight assembly. Remove and check the two small side bulbs.

Next, move on to the central headlight bulbs: first, remove the small cover that protects the bulb, then pull it out. One of the two central bulbs is protected by a cover secured with a screw that needs to be removed with a small Phillips screwdriver (this is the only step that requires a tool other than your hands).

If you want to replace the entire headlight, you must first disconnect its electrical connector.

Release it by pressing on the colored part of the connector with your fingers. Take the new headlight and first connect its connector.

Place the new headlight in its position and reattach the metal clips.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Volvo Xc90 (2002-2014 / MK 1) To perform this simple task, first release the hood using the latch, then lift it and secure it with the prop rod. This will give you access to the b…
Volvo Xc90 (2002-2014 / MK 1) The step-by-step instructions in this guide will show you how to remove and replace the front turn signal bulb on a Volvo XC90. First, open the vehic…
Volvo Xc90 (2002-2014 / MK 1) If you own a first-generation Volvo XC90 (2002-2014) and want to replace the headlight bulb yourself, follow these steps. First, turn off the vehicle…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos