Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Volvo XC90

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Headlight bulb

To perform this simple task, first release the hood using the latch, then lift it and secure it with the prop rod. This will give you access to the back of the headlight in question, which can be removed by simply taking off the brackets that secure the headlight. Now you can pull out the headlight and remove the protective covers that shield each bulb. Next, disconnect the plug that powers them and replace the necessary bulbs. Finally, retrace the steps described for reassembly.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Volvo XC90
How to Replace the Headlight Bulb on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) If you own a first-generation Volvo XC90 (2002-2014) and want to replace the headlight bulb yourself, follow these steps. First, turn off the vehicle…
How to Replace the Turn Signal Bulb in the Front Headlight of the Volvo XC90
How to Replace the Turn Signal Bulb in the Front Headlight of the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today's instructions will allow you to disassemble and replace the turn signal bulb in the front headlight of the Volvo XC90. First, open the hood of…
Replacement of the front turn signal bulb on the Volvo XC90
Replacement of the front turn signal bulb on the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) The step-by-step instructions in this guide will show us how to disassemble and replace the turn signal bulb of the front headlight of the Volvo XC90…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos