Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulb

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Headlight bulb

Open the hood and completely remove the headlight assembly. At the back, remove the lamp cover located behind the headlight until it is completely detached. To access the bulb, remove the retaining springs from the socket and carefully take it out, setting it aside. Once the socket is removed, extract the old bulb. Insert the new xenon bulb, being very careful not to touch the glass bulb with your hands. Reposition the socket in its housing and secure it with the spring. Reattach the cover. Repeat the same operation with the other headlight. Check the operation by turning on the headlights.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Fog Light Bulb on Volvo XC-90
Replacing Front Fog Light Bulb on Volvo XC-90
Volvo Xc90 (2002-2014 / MK 1) In this tutorial video, you will learn how to remove and replace the front fog light bulb on a Volvo XC-90. First, lift the vehicle and access the ba…
Replacing Front Fog Light
Replacing Front Fog Light
Volvo Xc90 (2002-2014 / MK 1) To facilitate disassembly, it is recommended to lift the vehicle on a hoist: the fog light bulb is accessed from inside the bumper. Disconnect the co…
Replacement of the rear fog light bulb of the Volvo XC 90 MK2
Replacement of the rear fog light bulb of the Volvo XC 90 MK2
Volvo Xc90 (2015-2026 / MK 2) The rear fog light mounted on the Volvo XC 90 proves to be useful for signaling our presence to the cars following us, especially on foggy days. Ther…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos