Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembling the Key Fob for the Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Key

This guide provides instructions to disassemble and replace the shell of the key fob for the Volvo XC60, as well as the XC90. First, take the key fob in hand and remove the physical key from inside it. Then, pry open the side slot of the fob to split it into two parts, giving you access to the battery and the circuit board, as shown in the video. At this point, remove all components from the shell to replace it, reassembling the circuit board and the chip correctly, following the video tutorial to the end!

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassemble Volvo XC60 Key
Disassemble Volvo XC60 Key
Volvo Xc60 (2008-2016 / MK 1) How do you disassemble the key for the Volvo XC60? Let's look at disassembling the plastic parts of the key and replacing the battery. Take your remo…
How to Change the Battery in a Volvo XC60 Key Fob
How to Change the Battery in a Volvo XC60 Key Fob
Volvo Xc60 (2008-2016 / MK 1) How to change the battery in a Volvo XC60 key fob? Let's see how to disassemble it. Take your ignition key and use a screwdriver to pry between the t…
How to replace the battery of the Volvo XC60 remote control
How to replace the battery of the Volvo XC60 remote control
Volvo Xc60 (2017-2026 / MK 2) Today we will explain how to replace the battery of the Volvo XC60 remote control. To perform this operation, we must press the button on the side of…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos