Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on a Volvo XC70?

Model: Volvo Xc70 MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

See other generations:
Video tutorial

To replace the external wing mirror on a Volvo XC70, use a tool to pry off the door panel from its housing. This will allow you to locate the connector attached to the mirror, which must be disconnected.

Now, loosen all the screws securing the mirror so that it can be completely removed from its housing. You can then insert the new mirror into its place, securing it with the screws and repositioning the door panel.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel in the Volvo XC70?
How to Remove the Front Door Panel in the Volvo XC70?
Volvo Xc70 (2000-2007 / MK 2) To remove the front door panel in the Volvo XC70, start by removing the front part of the armrest, using a flat-head screwdriver or an equivalent too…
How to Replace the Cabin Fan Resistor on a Volvo XC70?
How to Replace the Cabin Fan Resistor on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) To replace the cabin fan resistor on a Volvo XC70, start by removing the side cover of the centre console located near the driver's footwell. Once th…
Replacing the Rear Light on the Volvo XC70
Replacing the Rear Light on the Volvo XC70
Volvo Xc70 (2000-2007 / MK 2) Today, we will go through the steps to remove and replace the rear light on the Volvo XC70. First, open the tailgate and start unscrewing the fixing …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos