Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Dog Divider Net in the Volvo XC40

Model: Volvo Xc40 MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

Video tutorial

In this video, see how to install a dog divider net in the Volvo XC40. The recommended net can be found on the gytisautek website. The code is GAVOL-HG002 and it costs 3,404 Norwegian kroner, which is just under $300; shipping is free.

The installation takes no more than 15 minutes, and the hardware is included in the installation kit. If you have two dogs, you can also request the divider so that the two animals do not disturb each other during the trip, and in that case, the price increases to $536. As shown in the video, the installation is very simple and does not require any special tools.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in a Volvo XC40
How to Replace the Key Battery in a Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) Start by pressing and holding the button located at the bottom of the key fob for your Volvo XC40, then remove the back cover of the key. Next, uncli…
How to Reset the Tire Pressure Light on the Volvo XC40
How to Reset the Tire Pressure Light on the Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) Resetting the tire pressure light on the Volvo XC40 is a simple task you can do on your own. This short video tutorial will guide you step by step. F…
How to Reset the Service Light on a Volvo XC40?
How to Reset the Service Light on a Volvo XC40?
Volvo Xc40 (2017-2026 / MK 1) Resetting the service light on a Volvo XC40, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, make sure you …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos