Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volvo XC60 MK2

Model: Volvo Xc60 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Warning light – error code

See other generations:
Video tutorial

In this video, you can see how to reset the service light on the Volvo XC60 MK2: enter the vehicle, close all doors, and without pressing any pedals, turn the ignition switch clockwise. On the left side of the steering wheel, there is a button panel, where you will find a larger button in the center that you need to press and hold for about ten seconds.

The instrument cluster display will start to flash. Wait three seconds and release the switch; at this point, a confirmation message will appear on the display, and the service light will be reset.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To reset the Service light on a Volvo XC60, completely turn off the instrument cluster. Then, press and hold the down arrow button located on the lef…
How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) In this tutorial, you will see how to reset the service light on a Volvo XC60, a very simple and quick operation that should only be performed after …
How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on a Volvo XC60, turn on the ignition and then connect a diagnostic tool to the vehicle's OBD port. This port is located o…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos