Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc70
    4. : Resetting the service light on the Volvo XC70 MK2.

Volvo Xc70 - Video tutorial

Model: Volvo Xc70 MK 2 - Years 2000-2007
Part: Checks and maintenance
Operation: Resetting the service light on the Volvo XC70 MK2.

The ignition of the orange triangular warning light with an exclamation point in the center on the instrument panel of the Volvo XC70 warns us that we are reaching the mileage specified in the maintenance schedule for the engine oil change. After replacing the oil, we reset the system that handles the notification. Sit in the driver's seat of the car, press the button to the left, at the bottom of the speedometer and hold it down, turn the ignition key to position two. When the orange light starts flashing, release the button and turn off the instrument panel to complete the reset procedure.


Posted on 31 March 2024 by ScegliAuto



How do you reset the Service light on the Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) The operation of resetting the Service light on the Volvo XC70 is done by holding down the button located on the right side of the instrument panel.
To reset the service light on the Volvo XC70.
Volvo Xc70 (2007-2016 / MK 3) Today's guide will show us the procedure for resetting the service light for regular oil change maintenance on the Volvo XC70. First, we get into the
How do you reset the Service light on the Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) On the Volvo XC70, the procedure to reset the Service light is done by holding down the button located on the right side of the instrument panel. Whi

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos