Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : How to remove the steering wheel airbag of an Alfa Romeo Mito

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Airbags
Operation: How to remove the steering wheel airbag of an Alfa Romeo Mito

How to remove the steering wheel of an Alfa Romeo Mito? Let's see how to proceed in this video. Before disassembling the car steering wheel, we mark on the screwdriver the measurement of the cm to be inserted in the back of the steering wheel. Insert the screwdriver into the slots on the rear of the steering wheel and rotate to the left until the two clips that hook the airbag are released. Once the airbag has been removed, we immediately disconnect the power supply terminals and extract the same from the steering wheel. To reassemble the airbag: connect the power supply terminal, then press the same on the steering wheel with your hands, until the clips inside snap into place.


Posted on 6 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Mito 2008-2018 - What does the Alfa Romeo Mito airbag failure mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos