Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the CV Boot on Alfa Romeo 147

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Axle shaft

Let's see how to remove the boot from a joint on an Alfa Romeo 147. Position your car on a column lift: raise it to a comfortable height to work on, then loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Next, begin to unscrew the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Alfa Romeo 147 (2000-2010 / MK 1) To replace the driveshaft on an Alfa Romeo 147, lift the car so that the wheel corresponding to the driveshaft to be replaced can be removed from the…
Alfa Romeo 147 (2000-2010 / MK 1) In this video, follow the essential instructions to remove the front driveshaft to replace its oil seal on an Alfa Romeo 147. First, lift the vehicle…
Alfa Romeo 147 (2000-2010 / MK 1) To replace the driveshaft oil seal on an Alfa Romeo 147, loosen the bolts securing the corresponding wheel so it can be removed. Then, loosen the scr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos