|
Do it yourself
| |||
| ||||
What to Do if the Power Steering of the Alfa Romeo 159 JTD is Hard and Noisy
Model: Alfa Romeo 159
MK 1
- Years 2005-2011
On Alfa 159s, it can frequently happen that the power steering becomes hard and noisy: the first thing to do is to change the oil reservoir for the steering. As seen in the video, this component is located at the front of the engine bay, so it is sufficient to unscrew the three bolts found on the sides to remove it, then disconnect the two hoses (supply and return) located underneath, but first, try to recover most of the oil from the reservoir, which would otherwise be lost. The recovery hose has a quick connector, and once removed, turn it upwards to prevent oil from spilling into the engine, and connect a rubber tube to the rigid hose to direct the oil into a container while someone starts the engine. Usually, there is no more than one litre to one and a half litres in the system. After this, clean the hoses well, reconnect them, and then restore the level in the reservoir. The vehicle should then be lifted at the front and the steering wheel turned 5 or 6 times on each side, with the engine off so that the system fills up. Then you can lower the vehicle and start the engine. At this point, the noise should be gone.
Posted on 30 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Alfa Romeo 159
(2005-2011 /
MK 1)
This short guide will show us the main steps on how to disassemble and replace the turbocharger on the Alfa Romeo 159 2.4 JTD. First of all, we open …
Alfa Romeo 159
(2005-2011 /
MK 1)
In this video, we see how to remove the alternator of the Alfa Romeo 159 1.9 JTD: first, we disconnect the battery, always starting with the negative…
Alfa Romeo 159
(2005-2011 /
MK 1)
If the cigarette lighter socket on your Alfa Romeo 159 has suddenly stopped working, the first thing to do is check the status of the respective fuse…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Reset the Tyre Pressure Light on the Opel Grandland X
While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.072
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |