Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on an Alfa Romeo 147

Model: Alfa Romeo 147 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Air filter

Video tutorial

To change the engine air filter on an Alfa Romeo 147, open the bonnet and locate the filter housing in the engine compartment, connected to the air intake system. Remove the screws or release the clips holding the cover of the filter box. Lift the cover and extract the old filter element from its seat.

Before fitting the new filter, remove any dust or dirt present inside the housing. Then insert the new filter in the correct position, paying attention to the fitting direction.

Close the filter box cover, securing it again with the screws or clips previously removed. Finally, check that everything is fitted correctly and close the vehicle's bonnet.


Posted on 20 May 2026 by ScegliAuto


Related tutorials

Replacing Air Filter on Alfa Romeo 147
Replacing Air Filter on Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Today, you will learn how to remove and replace the engine air filter on an Alfa Romeo 147 Twin Spark. First, open and lift the bonnet and unscrew th…
How to Replace the Air Filter of the Alfa Romeo 147
How to Replace the Air Filter of the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) To replace the air filter of the Alfa Romeo 147, open the bonnet to access the components inside the engine bay. Here, in the area between the engine…
Replacing the engine air filter on the Alfa Romeo 147 JTDm
Replacing the engine air filter on the Alfa Romeo 147 JTDm
Alfa Romeo 147 (2000-2010 / MK 1) A clean engine air filter allows the engine to unleash its full power without hesitation, as it ensures all the air it needs. That said, in the case …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos