Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

Video tutorial

This guide shows how to reset the service warning light on the Alfa Romeo Mito. First, sit in the driver's seat and close all the doors. By repeatedly pressing the system selection button, highlight the word "trip" on the multifunction display.

Press the button again until the mileage appears on the multifunction display. At this point, press and hold the call acceptance button while simultaneously pressing the "OK" button for 5 seconds.

Using the menu scroll button, navigate to the "ASSYST PLUS" tab and then to the "FULL SERVICE" tab, then press the "OK" button. Use the return button to exit the system menu.

Turn off and then turn on the ignition to check that the procedure has been completed correctly.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Warning Light on the Alfa Romeo Mito 1.6
How to Reset the Oil Warning Light on the Alfa Romeo Mito 1.6
Alfa Romeo Mito (2008-2018 / MK 1) After completing a full service with oil and filter replacement, it is important to reset the oil warning light; otherwise, the car will continue to …
How to Reset the Service Light on an Alfa Romeo Mito?
How to Reset the Service Light on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) The function of the service light on the Alfa Romeo Mito is to remind the driver that the service interval has been reached and that maintenance is d…
How to Reset the Service Light on the Alfa Romeo MiTo?
How to Reset the Service Light on the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) To reset the Service light on the Alfa Romeo MiTo, connect the diagnostic tool to the vehicle's OBD port, located at the bottom left of the steering …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos