Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. 159
  6. : How to replace the thermostat in the Alfa Romeo 159

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Thermostat
Operation: How to replace the thermostat in the Alfa Romeo 159

In today's video we see how to replace the thermostat in the Alfa Romeo 159. This tutorial also applies to the other two models of the same family, the Brera and the Spider. First of all, remember to intervene only with a cold engine to avoid problems. First, let's open the bonnet. We recommend disconnecting the service battery to avoid problems. We identify the thermostat, positioned in the right side of the engine compartment, at the bottom. Disconnect it from its connector and extract it. So let's insert the new unit and try it out. We then finish the job.


Posted on 28 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos