Do it yourself
| ||||
|
Alfa Romeo 147 - Video tutorial
Model: Alfa Romeo 147
MK 1
- Years 2000-2010 In this video tutorial we can see how the spark plugs can be replaced on an Alfa Romeo 147. The first thing to do is lift the bonnet and secure it with a special rod. Remove the engine cover by unscrewing the screws that fix it. Unscrew the ignition coil bracket, use a Torx 40 key; once the ignition coil bracket has been unscrewed, we must unscrew the spark plugs with a 16 socket wrench; once all the spark plugs have been unscrewed, make sure that no dirt gets inside the holes. At this point we have to screw the spark plugs and tighten them, using a 16 socket wrench; then install the coils to the spark plug holes, use a Torx 40. Connect the ignition coil connectors.
Posted on 21 May 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the oil warning light on the Alfa Romeo GiuliettaIf you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.073
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |