Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. 156
  6. : How to change the gearbox oil of the Alfa Romeo 156

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Gear oil
Operation: How to change the gearbox oil of the Alfa Romeo 156

A quick and easy task that will save you time and money from the mechanic. With a dowel remove the oil tank cap under the engine in this way, with a tray positioned under the cap, you will collect the exhausted oil, once all the liquid has flowed out you can reposition the cap. Once this is done, go and use a pump with a tube, insert this tube inside the hole on the gearbox and start pumping all the liquid inside the gearbox, now you can double-check all the caps concerned and seal them properly without letting them escape. other liquids.


Posted on 19 September 2023 by ScegliAuto



Alfa Romeo 156 1.8 Twin Spark gearbox oil change
Alfa Romeo 156 (1997-2007 / MK 1) In today's video tutorial we will see how to replace the gearbox oil of an Alfa Romeo 156 1.8 Twin Spark. First of all we go to lift the car and we g
Guide to reset the engine oil warning light of the Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Let's see in this guide how to reset the service or engine oil light of the Alfa Romeo 156 ordinary maintenance, following these simple and quick ste
How to reset the oil service in the Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) In this video we can see how to reset the oil service in the Alfa Romeo 156, an operation to be carried out only after having changed the oil and its

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos