Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : How to replace the clutch pump on an Alfa Romeo 156

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Pump
Operation: How to replace the clutch pump on an Alfa Romeo 156

To access the clutch pump we must create the necessary space by removing the air filter, the battery and its support. In the compartment we will immediately find the pump that we intend to replace, it will be enough to disconnect the inlet pipe after having put something that collects any excess oil and we can then remove the front stop that holds everything in place. At this point we slide the pump from the opposite side so that it can be removed from its aluminum support. We can now proceed with the replacement and after topping up the hydraulic system we will bleed the air present.


Posted on 9 December 2023 by ScegliAuto



How do you replace the clutch of an Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) In order to replace the clutch of the Alfa Romeo 156, you need to remove the front wheels and the inner covers of the respective wheel arches, so tha
How to disassemble the fuel pump / float of the Alfa Romeo 156 1.9 JTD
Alfa Romeo 156 (1997-2007 / MK 1) We see in this guide the procedure necessary for the disassembly and replacement of the fuel pump or the floating pump of the Alfa Romeo 156 1.9 JTD.
How to change the washer fluid pump on Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) In today's video tutorial we will see how to remove and replace the windshield washer fluid pump on the Alfa Romeo 156, in simple steps. First of all

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos