Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil and Oil Filter on the Alfa Romeo Stelvio

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Engine oil

Video tutorial

Changing the engine oil and oil filter on an Alfa Romeo Stelvio is a fairly simple and quick task you can do yourself. To perform this operation, open the hood and remove the oil filler cap, then lift the vehicle.

Remove the oil pan cover and then loosen the bolt to drain the fluid inside. Tighten the bolt after the fluid has drained, then remove the engine cover to loosen the bolt that secures the oil filter and replace it. Lower the vehicle and proceed to refill the oil in the reservoir.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on the Alfa Romeo Stelvio?
How to Change the Engine Oil and Oil Filter on the Alfa Romeo Stelvio?
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this video, you will see the procedure for replacing the engine oil and oil filter while performing the regular maintenance service on the Alfa Ro…
How to Change the Engine Oil of the Alfa Romeo Stelvio?
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) To change the engine oil of the Alfa Romeo Stelvio, lift the vehicle with a jack to access the components located under the hood. Here, you will find…
How do you replace the motor oil of the Alfa Romeo Stelvio?
How do you replace the motor oil of the Alfa Romeo Stelvio?
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) To replace the motor oil of the Alfa Romeo Stelvio, you will need to loosen the drain plug located at the bottom of the engine compartment, near the …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos