Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the third brake light of the Audi A4 2023

Model: Audi A4 B9 - Years 2014-2024
Part:

If you want to dismantle the third brake light on your 2023 Audi A4 by yourself, all you need to do is carefully read the following guide and apply what is described. First of all, you need to go inside the car and make sure it is turned off, then go to the rear seats and, with the help of a flathead screwdriver (or a similar object), remove the entire plastic panel located in the upper area of the windshield. Once you have removed the panel in question, you have also removed the third brake light and the procedure is successfully completed.

Posted on 2 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the third brake light of the Audi A4
How to disassemble the third brake light of the Audi A4
Audi A4 (2014-2024 / B9) Today's instructions will allow us to disassemble and replace the tail light or third brake light of the Audi A4, in simple and quick steps. First, w…
How to replace the third brake light on the Audi A4
How to replace the third brake light on the Audi A4
Audi A4 (2000-2004 / B6) Today's steps will show us how to disassemble and replace the third brake light on the Audi A4. First, we open the rear trunk door and start removing…
How do you replace the third brake light bulb of the Audi A4?
How do you replace the third brake light bulb of the Audi A4?
Audi A4 (2007-2016 / B8) In order to replace the third brake light bulb of the Audi A4, you need to access the interior of the car to locate the internal covering of the thir…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos