Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the front passenger airbag of the Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Checks and maintenance

Below we will see useful information on how to deactivate the front passenger airbag, in case of a car seat being present, on the Audi A3. First of all, we get on board the car and start by opening the glove compartment; then we use the physical key and insert it into the cylinder to turn the airbag off, deactivating the passenger one, as shown in the video. At this point, it will be possible to install the car seat safely; to reactivate the passenger airbag, simply turn the cylinder located inside the glove compartment back to on!

Posted on 31 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you deactivate the passenger airbag of the Audi A3?
How do you deactivate the passenger airbag of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In order to deactivate the passenger airbag of the Audi A3, you need to open the glove compartment located on the side of the front passenger. Once t…
How to Remove the Airbag from an Audi A3
How to Remove the Airbag from an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) It is advisable to perform this procedure with the battery disconnected. Before you start, sit in the driver's seat of your Audi A3. Begin by turning…
How to remove the steering wheel airbag of the Audi A3
How to remove the steering wheel airbag of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today we will explain how to remove the steering wheel airbag on an Audi A3 model 8V. To remove the airbag, first we need to remove the steering whee…

Other guides you may be interested in

    Frequently Asked Questions

    • A3 2012-2019 - How to remove the armrest of an Audi A3? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos