Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of the 2019 Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

Replacing the timing belt of the 2019 Audi A3 is a fairly simple operation to perform independently, thanks also to our short video tutorial that will show you the steps to follow. The first step is to open the front hood of the car and remove the fuel filter and the side cover grille of the belt using a wrench.

Then we lift the car and remove the front wheels. We remove the lower cover parts of the car and proceed with the replacement of the timing belt, unscrewing the nut on the pulley and loosening the tensioner roller in order to remove the worn belt.

After cleaning with a wire brush, we insert the new timing belt tightening the tensioner and the roller.


Posted on 6 December 2024 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on an Audi A3?
How to Replace the Timing Belt on an Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) Good morning, today's objective is to replace the timing belt on your Audi A3. Start by opening the front bonnet and removing the air filter system. …
How and When to Replace the Timing Belt of the Audi A3 2.0 TDI
How and When to Replace the Timing Belt of the Audi A3 2.0 TDI
Audi A3 (2012-2019 / 8V, MK 3) Below are the instructions on how and when to replace the timing belt on the Audi A3 2.0 TDI (and other models with the same engine); the manufacture…
Guide to Replacing the Timing Belt on the Audi A3 1.6 TDI
Guide to Replacing the Timing Belt on the Audi A3 1.6 TDI
Audi A3 (2012-2019 / 8V, MK 3) Today's main instructions will show you how to remove and replace the timing belt and water pump on the Audi A3 1.6 TDI, as well as the Volkswagen Go…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos