Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the crankshaft bearing of the Audi Q5?

Model: Audi Q5 MK 2, 80A - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Bearing

See other generations:
Video tutorial

In order to replace the crankshaft bearing of the Audi Q5, it will be necessary to remove the bulky components that prevent access to the end of the crankshaft: first of all, the crankshaft pulley must be removed by loosening the screws that fix it to its seat, also removing the corresponding timing belt.

In this way it will be possible to locate the crankshaft bearing, which must be removed from its seat using an extractor: the new bearing must be greased and installed in its seat, reassembling the removed components.


Posted on 14 January 2025 by ScegliAuto


Related tutorials

How and When to Change the Timing Belt on the Audi Q5 2.0 TDI
How and When to Change the Timing Belt on the Audi Q5 2.0 TDI
Audi Q5 (2017-2025 / MK 2, 80A) Today's guide will show you how to remove and replace the timing belt on the Audi Q5 2.0 TDI. The manufacturer states that for this type of engine, t…
How to Replace the Water Pump on the Audi Q5?
How to Replace the Water Pump on the Audi Q5?
Audi Q5 (2008-2017 / MK 1, 8R) To replace the water pump on the Audi Q5, lift the vehicle and remove the cover panel from the bottom of the engine compartment. Once removed, discon…
How to Replace the Timing Chain on an Audi Q5
How to Replace the Timing Chain on an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) To replace the timing chain on an Audi Q5, access the left side of the engine block where the chain is located. First, remove the plastic cover, then…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos