Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the ignition cylinder of the Audi A6

Model: Audi A6 MK 2, C5 - Years 1997-2004

Following these brief and simple steps, we will see how to disassemble and replace the ignition cylinder of the Audi A6. First, we get into the car and start by removing the central cover of the dashboard; it will be necessary to then remove the steering wheel and its airbag, disconnecting the electrical connector and unscrewing the central screw. At this point, we remove the steering column cover and disconnect the electrical connector of the cylinder; then we remove the cylinder and replace it with the new original one, consequently also replacing the ignition key.

Posted on 24 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Audi A6 lock cylinder
Removing the Audi A6 lock cylinder
Audi A6 (2004-2012 / MK 3, C6) In this short video tutorial we will see how to remove the lock cylinder of an Audi A6 second series. First we open the door and we go to remove the …
How to replace the gaskets of the cylinder covers in the Audi A6?
How to replace the gaskets of the cylinder covers in the Audi A6?
Audi A6 (1994-1997 / MK 1, C4) In this tutorial, we can see how to replace the gaskets of the cylinder covers in the Audi A6. Before proceeding, of course, we wait for the engine t…
Replacing Cylinder Head Fastening Pins
Replacing Cylinder Head Fastening Pins
Audi A6 (1997-2004 / MK 2, C5) When replacing the cylinder head gasket, it is good practice to use a new set of fastening pins for the cylinder head. Start by cleaning the threaded…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos