Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up the windshield washer fluid in the Audi A4

Model: Audi A4 B9 - Years 2014-2024
Part: Checks and maintenance

Today we will explain how to top up the windshield washer fluid of the 2018 Audi A4. The windshield washer fluid tank, unlike other vehicles, is not located on the front of the hood but on the right side between the hood opening and the windshield. To top up the fluid inside, we need to lift the cap and pour in the liquid. After pouring the necessary amount of fluid, usually between the minimum and maximum line, we close the tank cap and the hood. The windshield washer fluid can be purchased online or at auto parts stores, with the cost varying depending on the liters and brand but on average not exceeding €30.

Posted on 21 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to top up the windshield washer fluid in the Audi A4?
How to top up the windshield washer fluid in the Audi A4?
Audi A4 (2014-2024 / B9) .. In this tutorial, we can see how to top up the windshield washer fluid in the Audi A4, an extremely simple and quick operation. As.. …
How to top up the washer fluid on the Audi A4 B8
How to top up the washer fluid on the Audi A4 B8
Audi A4 (2007-2016 / B8) In this video tutorial we will see how to top up the washer fluid on the Audi A4 B8, in the Avant version, but also on most of the manufacturer's mod…
Removing the washer reservoir on Audi A4 B7
Removing the washer reservoir on Audi A4 B7
Audi A4 (2004-2008 / B7) Let's see in this video how to disassemble and replace the washer fluid reservoir or reservoir on an Audi A4 B7, following the instructions below. Fi…

    Frequently Asked Questions

    • A4 2007-2016 - Where is the Audi A4 fuel pump relay located? Read answer

How to Remove and Reinstall the Rear Wheel Support Plates

To remove and reinstall the rear wheel support plates, first lift the car on a ramp. Then, using a 12 mm socket, unscrew the bolts securing the wheel to remove it. Next, take out the support assembly by unscrewing the relevant bolts. You can then slide out the first plate by unscrewing the bolts with the appropriate spanner. After that, using a 35 mm socket, remove the other bolt that precedes the second plate. Proceed to unscrew all the smaller screws to take it off. To reinstall everything, simply reverse all the steps just mentioned, ensuring to clean all parts thoroughly and lubricate them.

Watch the video!


by ScegliAuto

More videos