Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the AdBlue error on an Audi A6 using the VCDS program

Model: Audi A6 C7, MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Onboard computer

See other generations:
Video tutorial

In this video we can see how to correct the AdBlue error on an Audi A6 (but also A7 and A8): we will also need a laptop with the classic VAG VCDS program, which is used to correct these errors on the control unit. So let's connect to the EOBD port and connect to the engine control model, where the program will identify the chassis of our car. Let's go to security access, enter our identification PIN, then go to basic settings, efficiency control.

It will ask us to press the brake and accelerator, then it will take from ten to fifteen minutes and the AdBlue error message will disappear.


Posted on 20 April 2025 by ScegliAuto


Related tutorials

How to Reset the Service Reminder on an Audi A6 C6
How to Reset the Service Reminder on an Audi A6 C6
Audi A6 (2004-2012 / C6, MK 3) In this video, see how to reset the service light on an Audi A6 C6: first, turn on the ignition and start the engine. You will notice that the servic…
How to reset the AdBlue top-up warning light on the Audi A6 3.0 TDI
How to reset the AdBlue top-up warning light on the Audi A6 3.0 TDI
Audi A6 (2011-2018 / C7, MK 4) Today we will discover the steps that will allow us to reset the AdBlue fluid top-up indicator on the Audi A6 3.0 TDI. First of all, we get on board …
How to Refill AdBlue in the Audi A6
How to Refill AdBlue in the Audi A6
Audi A6 (2011-2018 / C7, MK 4) If you see a warning about AdBlue when starting your Audi A6 Diesel, you need to refill the tank as soon as possible. First, turn off the engine and …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos