Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the oil and engine filter on an Audi A3

Model: Audi A3 MK 1, 8L - Years 1996-2003
Part: Engine oil

How to replace the oil and engine filter on an Audi A3? Let's see how to proceed with the replacement of the filter and topping up the liquid: we lift the car up with the column bridge, then, with a socket wrench, unscrew (the large pin) tightening the sump the oil is contained (placed in the lower part of the car; let the liquid flow into a container for disposal. Remove the worn oil filter and place a new one. We bring the car to the ground and open the car door, pull up the compartment opening lever engine located at the bottom left of the dashboard and lift up the hood; Top up the new liquid and close the front hood.

Posted on 9 September 2019 by ScegliAuto

Video tutorial

Related tutorials

How to replace the oil filter and engine oil of the Audi A3
How to replace the oil filter and engine oil of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today we will explain how to replace the oil filter and engine oil of the Audi A3 mk2 model. Pull the front hood release lever and open the hood. Rem…
How to replace the filter and engine oil on an Audi A3
How to replace the filter and engine oil on an Audi A3
Audi A3 (2012-2019 / MK 3, 8V) How to replace the filter and engine oil on an Audi A3? Let's see how to proceed with the replacement: we lift the car on a column bridge, remove the…
How to perform maintenance service on the Audi A3
How to perform maintenance service on the Audi A3
Audi A3 (2012-2019 / MK 3, 8V) The regular maintenance check is necessary to ensure the proper functioning of the engine over time; let's see how to replace the motor oil and oil f…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos