Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the Audi TT 8N located?

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Fuse box

To find the box containing all the various fuses for your Audi TT 8n, you must follow the steps described in the following guide. Before starting, make sure you have parked the car on a flat surface, then turn it off and open the driver's side door. Once you have done that, locate the protective cover at the end of the dashboard and remove it completely. This will give you access to all the fuses in your Audi TT 8n and the procedure can be considered successfully completed. Before working on the fuses, disconnect the battery.

Posted on 18 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Audi TT located?
Where is the fuse box of the Audi TT located?
Audi Tt (2006-2014 / 8J, MK 2) Unlike other Audi models, the Audi TT has two fuse boxes inside. The first fuse box is installed in the trunk, specifically on the right side behind …
Where are the fuses of the Audi TT located?
Where are the fuses of the Audi TT located?
Audi Tt (2006-2014 / 8J, MK 2) All the fuses of the Audi TT are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be po…
Where is the main fuse box of the new Audi TT 2022
Where is the main fuse box of the new Audi TT 2022
Audi Tt (2014-2023 / MK 3, 8S) If you are looking for the box that contains all the various most important fuses in your 2022 Audi TT then this guide is all you need. Before procee…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos