Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the oil level on an Audi A6 C7

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Engine oil

In this video, we can see how to check the engine oil level on an Audi A6 C7 version, through the MMI (Multi Media Interface) system. Using the buttons on the central console, we go to the menu and then to the submenu related to the service, where we specifically choose "oil level". Here, the system tells us that it needs a couple of minutes to perform the check, and that the engine must be at operating temperature, and also the engine must be turned off. After this time has passed, and these specifications have been met, we can see the indication of the oil level in the engine.

Posted on 26 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the AdBlue warning light in the Audi A6?
How to remove the AdBlue warning light in the Audi A6?
Audi A6 (2011-2018 / C7, MK 4) If the AdBlue warning light has come on in the dashboard of our Audi A6, it means that the pollution liquid has reached a too low level and therefore…
How to reset the oil indicator on the 2013 Audi A6
How to reset the oil indicator on the 2013 Audi A6
Audi A6 (2011-2018 / C7, MK 4) If you intend to manually reset the oil light of your Audi A6 (2013), you just need to read the steps described in the following guide and apply them…
How to reset the oil light on the Audi A6
How to reset the oil light on the Audi A6
Audi A6 (2018-2026 / MK 5, C8) To reset the warning light for the car service or oil change on an Audi A6, model C8, we need to turn on the vehicle's onboard computer and select th…

How to Remove the Spark Plugs from a Volkswagen Up

How to remove and replace the spark plugs on a Volkswagen Up? Follow these steps for proper removal. Pull the lever to open the engine compartment and lift the front bonnet, securing it in place. Remove the plastic soundproofing panel on the cylinder head, then disconnect the power connectors using a screwdriver after unscrewing them with a socket wrench. Pull off the coils by hand and unscrew the spark plugs with the socket wrench, finally pulling them out of the cylinder head. Take the new spark plugs and guide them into the engine head using the extension of the socket wrench. Finally, tighten the spark plugs securely and reconnect the respective power connectors. To finish: reassemble the soundproofing panel and close the engine bonnet. - Socket wrench with sockets - Flat or screwdriver bits - Battery-powered screwdriver - Protective gloves.

Watch the video!


by ScegliAuto

More videos