|
Do it yourself
| |||
| ||||
How to emergency open the trunk lid of the Audi A4
Today we will explain how to open the trunk lid of the Audi A4 model B8 in emergency situations. Emergency opening can be important when we need to retrieve something from the trunk but the lock is jammed. To perform this operation, we need to recline the seats to access the compartment. We move the cover of the internal lock using a flathead screwdriver. Using the same screwdriver, we operate the lock from the inside, unlocking it by pressing on it and giving a few taps to the left. By doing this, we would have opened the trunk; unfortunately, it will be necessary to replace the lock afterward.
Posted on 22 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Audi A4
(2007-2016 /
B8)
The main steps today will show us how to manually open and in case of emergency, the rear trunk door of the Audi A4. First, we open the rear doors an…
Audi A4
(2007-2016 /
B8)
In the Audi A4, it can happen that the trunk hatch gets locked, for example due to a malfunction of the control button or the lock actuator. In these…
Audi A4
(2007-2016 /
B8)
In the Audi A4, it can happen that the fuel door gets stuck, for example due to a malfunction in the control button or lock actuator. In these cases,…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.051
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
