Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light on an Audi A6

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Tail light bulb

See how to remove the third brake light on an Audi A6. Remove the center rear spoiler (located on the spoiler). Take off the plastic cap with a screwdriver and remove the screws inside it. Once the spoiler is free from any constraints, detach it from the rear hatch (disconnect the related power connectors). Remove the brake light and disconnect the power connector, then take out the brake light from the hatch (after installing the bulbs) and unscrew the mounting pins. Install the new brake light and finally test the lights for proper operation.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper light of the Audi Q5
How to remove the rear bumper light of the Audi Q5
Audi Q5 (2017-2025 / 80A, MK 2) Below we will see the instructions that will allow us to disassemble and replace the rear bumper light of the Audi Q5, in simple steps. First of all,…
How to remove the rear light of the Audi Q5.
How to remove the rear light of the Audi Q5.
Audi Q5 (2008-2017 / MK 1, 8R) The guide shows how to disassemble the left rear light of the Audi Q5. The first operation to be performed is to open the trunk door and remove the f…
Replacement of the rear fog light bulb of the Audi Q5
Replacement of the rear fog light bulb of the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Below we will see the instructions that will allow us to disassemble and replace the rear bumper light bulb (fog light) of the Audi Q5. First of all,…

How to Remove the Window Regulator Motor from a Peugeot 106

How do we remove the right door panel of a Peugeot 106? Let's see together in this video how to proceed. Use a lever to remove the plastic cover of the door handle, then, with a screwdriver, undo the securing screws on the plastic panel. Once all the screws are removed, detach the plastic clips that secure the door. Remove the window crank. With your hands, take off the door panel, disconnect any power connectors and release cable. Remove the window regulator motor inside the door by peeling off the adhesive protection.

Watch the video!


by ScegliAuto

More videos