Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump from an Audi A4

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008
Part: Fuel pump

See other generations:
Video tutorial

Replace the fuel pump in an Audi A4. Disconnect the battery cables in the engine compartment. Then, remove the rear seat cushions from the car. Use a socket wrench to remove the fastening screws of the metal cap (if present), take it out from its seat, and cover the perimeter with absorbent paper to soak up any fluid leaks.

Unscrew the fuel pump clamp, disconnect the power terminals and the liquid circulation hoses. Extract the floating fuel pump from its seat along with the attached parts.

Finally, install the new pump with the attached parts.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Pump from an Audi A4
How to Remove the Fuel Pump from an Audi A4
Audi A4 (2000-2004 / B6) .. How to remove the fuel pump from an Audi A4? First, disconnect the battery cables; remove the carpet.. …
How to Remove the Fuel Pump from the Audi A4 Fuel Tank
How to Remove the Fuel Pump from the Audi A4 Fuel Tank
Audi A4 (2000-2004 / B6) Is the fuel pump on your Audi A4 damaged? Here’s how to remove it. Start by removing the rear seats to access the fuel pump. Use a socket wrench to u…
How to Replace the Fuel Pump on an Audi A4
How to Replace the Fuel Pump on an Audi A4
Audi A4 (2000-2004 / B6) How to replace the fuel pump on an Audi A4? First, disconnect the battery cables. Then, remove the rear seat cushions (as shown in the video). Use a …

Other guides you may be interested in

    Frequently Asked Questions

    • A4 2007-2016 - Where is the fuel pump relay located in the Audi A4? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos