Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the fuel pump on Audi A6

Model: Audi A6 C5, MK 2 - Years 1997-2004
Part: Fuel pump

How to disassemble the damaged fuel pump on an Audi A6, let's see how to disassemble. We disassemble the rear seats, unscrew the tightening screws of the metal cap with a socket wrench, remove it from its seat. We unscrew the large lock nut of the fuel pump, disconnect the power supply terminals and the liquid circulation pipes. We extract the floating fuel pump from its seat. We mount the new fuel pump inside the tank, connect the diesel oil circulation pipes, the power supply above the pump. We tighten the screws and mount the seats.

Posted on 23 May 2020 by ScegliAuto

Video tutorial

Related tutorials

Fuel pump replacement on Audi A6
Fuel pump replacement on Audi A6
Audi A6 (2004-2012 / C6, MK 3) How do you disassemble the fuel pump on an Audi A6? To begin with, we need to remove the pump access covers: the rear seats or the cover panel. Once …
How do we replace the fuel pump of an Audi A6
How do we replace the fuel pump of an Audi A6
Audi A6 (1997-2004 / C5, MK 2) How do we replace the fuel pump of an Audi A6? To begin we disconnect the battery cables, then, we remove the rear seat seats of the car. With a wren…
How to Maintain the Fuel Pump of an Audi A6
How to Maintain the Fuel Pump of an Audi A6
Audi A6 (1997-2004 / C5, MK 2) Let's see how to maintain the fuel pump of an Audi A6: disconnect the battery cables, then remove the rear seat cushions of the car. Use a socket wre…

Other guides you may be interested in

How to Remove the Instrument Cluster on a Nissan Qashqai

How to remove the instrument cluster on a Nissan Qashqai? Follow these steps: use a lever to remove the trim plastics under the steering wheel and take out the air vent next to the instrument cluster. Unscrew the securing screws of the instrument cluster with a screwdriver; after removing the plastics, pull out the ignition button (right side) from the dashboard and detach the plastics in the centre of the cluster. Unscrew the securing screws around the instrument cluster and remove it along with the power cable located at the back of the cluster. Install a new part or replace the LEDs/bulbs in the cluster and reassemble it.

Watch the video!


by ScegliAuto

More videos