Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel float repair on Audi TT

Model: Audi Tt 8J, MK 2 - Years 2006-2014

To get to the fuel pump you will have to remove the rear passenger seat by lifting it from underneath and sliding it off the seat belts. You will thus be able to access the cover relating to the pump and the float. To get to the pump you have to unscrew the ring nut above and disconnect the delivery and return pipes (using the special hooks to be detached). Remove the pump and test the float plug with the tester. If, unsurprisingly, the problem with the float consists of this communication plug, unplug it and get a new plug that matches the burnt one. Reassemble everything.

Posted on 29 December 2020 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the fuel pump of the Audi TT.
Disassembly of the fuel pump of the Audi TT.
Audi Tt (1998-2006 / 8N, MK 1) Today's guide will show us the steps on how to disassemble and replace the fuel pump of the Audi TT. First, we open the front door and recline the ba…
How to disassemble the fuel pump of an Audi TT
How to disassemble the fuel pump of an Audi TT
Audi Tt (1998-2006 / 8N, MK 1) Before we can begin, we will have to get inside the cockpit of our Audi TT. So let's start by disengaging and removing the lower bench of the rear se…
How to open the fuel cap on Audi TT
How to open the fuel cap on Audi TT
Audi Tt (1998-2006 / 8N, MK 1) We unlock the Audi TT's refueling flap if we can't open it. To begin with, we open and lift the tailgate with a special key or button. We uncover the…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos