Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the battery of an Audi A1

Model: Audi A1 MK 1, 8X - Years 2010-2018
Part: Key

Do we want to replace the key battery? Let's see the replacement of the key battery on Audi A1. We take our remote control and go with the help of a small screwdriver to pry between the two key covers. We pry until the plastic part in the back of the key separates, then, extract the exhausted battery with a screwdriver and take a new one of the same size and voltage. Disassemble the small battery in the cover and replace it with a new one, press the key case until you hear the lock click. After having fixed the plastic of the key, we just have to test its functioning.

Posted on 14 July 2021 by ScegliAuto

Video tutorial

Related tutorials

Replace the key battery on Audi A1
Replace the key battery on Audi A1
Audi A1 (2010-2018 / MK 1, 8X) If the battery in the remote control has run out it is better to change it, let's see how in an Audi A1. We take the ignition key of the car and pres…
How do you replace the battery in the Audi A1 key?
How do you replace the battery in the Audi A1 key?
Audi A1 (2010-2018 / MK 1, 8X) The battery in the Audi A1 remote key is much easier to replace than the battery in many other car remote controls. In this case, in fact, it is not …
How to replace the remote control battery in an Audi key
How to replace the remote control battery in an Audi key
Audi A1 (2018-2025 / GB, MK 2) In this tutorial we can learn how to replace the remote control battery of a 2020 Audi A1 car. The operation is very simple and does not require any …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos