Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to find the Audi A6 fuse box easily

Model: Audi A6 - Years 2019-2026
Part: Fuse box

If you need to intervene on one or more fuses in your car, but you have not yet understood where the box is located, do not worry because you just need to follow our instructions. Before proceeding, we invite you to leave the engine off and above all to disconnect the negative pole of the battery so as to be able to operate safely. Once all the necessary precautions have been taken, go inside the vehicle (driver's side) and locate the plastic cover located on the side of the dashboard. Remove it with the help of a flat screwdriver and immediately below you will find the fuse box you were looking for.

Posted on 16 January 2022 by ScegliAuto

Video tutorial

Related tutorials

Replace the pressure switch that controls the air conditioning compressor on the Audi A6.
Replace the pressure switch that controls the air conditioning compressor on the Audi A6.
Audi A6 (2004-2012 / MK 3, C6) How to replace the air conditioning pressure switch that causes the fan motor to malfunction on an Audi A6. We need to open the hood and remove the p…
Where is the fuse box located in the Audi A6?
Where is the fuse box located in the Audi A6?
Audi A6 (2011-2018 / C7, MK 4) Today we will show you the location of the fuse boxes in the Audi A6 produced from 2012 to 2015. Inside this vehicle, there are three fuse boxes: the…
Diagram and location of the fuses of the Audi A6
Diagram and location of the fuses of the Audi A6
Audi A6 (2011-2018 / C7, MK 4) We will see below where to find the fuse boxes (internal and external) on the Audi A6. First of all, let's locate the internal fuse box, which we fin…

Other guides you may be interested in

Removing the Left Driver's Door Panel on a Toyota Aygo

Carry out the removal of the left driver's door panel on a Toyota Aygo, here’s how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever or screwdriver to remove the window winder from the door panel. Unscrew the screws of the upper door opening lever with a screwdriver, then remove the trim plastic near the lever (remove the fastening screws). Use the lever to detach the fastening clips of the door panel from the door. Finally, grasp the panel with your hands and pry it off from the door. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos