Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt on the Audi A3

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Timing belt

In this video we will show you how to replace the timing belt of the Audi A3. First of all, remove the water tank and the wiper tank to access the affected area. Then remove the oil filter by marking the position of the pipes (flow and return) with colored insulating tape. After lifting the engine with a jack, remove the engine support from the distribution side by unscrewing the four bolts. Remove the cover from the distribution compartment. Release the belt tensioner and remove the timing belt. Unscrew the four thousand row bolts of the pulley and remove it. Remove the cover by unscrewing the five screws. Fit the crankshaft lock so that the pulleys are locked. Remove the old timing belt from the pulleys and replace both the pulleys and the belt. Now reassemble the various parts following the reverse path.

Posted on 14 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the timing belt of an Audi A3?
How to replace the timing belt of an Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) Good morning, today's goal is to replace the timing belt of our Audi A3. Let's start by opening the front hood and removing the air filter system. Th…
How and when to replace the timing belt of the Audi A3 2.0 TDI.
How and when to replace the timing belt of the Audi A3 2.0 TDI.
Audi A3 (2012-2019 / MK 3, 8V) Below we will see the instructions on how and when to replace the timing belt on the Audi A3 2.0 TDI (but also on other models with the same engine);…
Guide to replacing the timing belt of the Audi A3 1.6 TDI.
Guide to replacing the timing belt of the Audi A3 1.6 TDI.
Audi A3 (2012-2019 / MK 3, 8V) The main instructions today will show us how to dismantle and replace the timing belt and water pump of the Audi A3 1.6 TDI, as well as the Volkswage…

Other guides you may be interested in

How to Remove and Reinstall the Rear Wheel Support Plates

To remove and reinstall the rear wheel support plates, first lift the car on a ramp. Then, using a 12 mm socket, unscrew the bolts securing the wheel to remove it. Next, take out the support assembly by unscrewing the relevant bolts. You can then slide out the first plate by unscrewing the bolts with the appropriate spanner. After that, using a 35 mm socket, remove the other bolt that precedes the second plate. Proceed to unscrew all the smaller screws to take it off. To reinstall everything, simply reverse all the steps just mentioned, ensuring to clean all parts thoroughly and lubricate them.

Watch the video!


by ScegliAuto

More videos