Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulb

Model: Audi A4 B6 - Years 2000-2004
Part: Headlight bulb

Replacing the front headlight bulb requires removing the headlight: once you open the hood, unscrew the two bolts that secure the headlight to the crossmember and those inside the engine compartment, one at the front, just below the hoses, and the other at the rear, under the power steering fluid reservoir. At this point, you can pull the headlight forward and remove it from its housing to have all the necessary maneuvering space for replacing the bulb: simply remove the protective cap, disconnect the power connector, the retaining spring, and remove the old bulb to insert the new one.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb
Replacing the Front Headlight Bulb
Audi A4 (2007-2016 / B8) Changing the front headlight bulb in your car is possible, although it can be a complex task due to the risk of breaking the internal housing of the …
Replacing Rear Headlight Bulb
Replacing Rear Headlight Bulb
Audi A4 (2004-2008 / B7) To replace the rear headlight bulb, you need to remove the headlight itself: open the trunk and locate the cap on the plastic cover corresponding to …
How to Replace the Headlight Bulb on an Audi A4 B7
How to Replace the Headlight Bulb on an Audi A4 B7
Audi A4 (2004-2008 / B7) This guide shows how to replace the headlight bulbs on an Audi A4 B7. After securing the vehicle and opening the hood, move to the back of the headli…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos