Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on an Audi A4

Model: Audi A4 B7 - Years 2004-2008
Part: Service warning light

In this video tutorial, learn how to reset the maintenance light on an Audi A4, models B6 and B7 produced from 2000 to 2008. This operation takes just a few seconds and can be done independently after changing the engine oil and its filter. Let’s go through the procedure. With the vehicle still off, press and hold the button with the image of a wrench located at the bottom right of the speedometer, then turn on the instrument cluster without starting the vehicle, and wait a few seconds with the button still pressed to reset. Turn off and restart the vehicle to check if the light has been reset correctly.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on an Audi A4?
How do you reset the Service light on an Audi A4?
Audi A4 (2000-2004 / B6) You can completely turn off the Service light that appears on the instrument panel of the Audi A4 by holding down the button with the wrench icon loc…
How to Reset the Tire Pressure Light on an Audi A4
How to Reset the Tire Pressure Light on an Audi A4
Audi A4 (2007-2016 / B8) This short video tutorial demonstrates how to reset the tire pressure light, or TPMS light, on an Audi A4, model produced from 2007 to 2016. First, t…
How to Reset the Yellow "Service" Light on an Audi A4
How to Reset the Yellow "Service" Light on an Audi A4
Audi A4 (2004-2008 / B7) Before you begin, sit in the driver's seat of your Audi A4. Start by pressing and holding the wrench-shaped button located below the right side of th…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos