Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter of the Audi A3.

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Cabin air filter

If you want to find out how to replace the cabin air filter of your Audi A3 third series (year 2012-2019), all you have to do is carefully read the following guide and put into practice what is described. First, enter the vehicle and reach the passenger seat. Then, open the glove compartment and immediately remove it completely and remove the protective panel located in the back area. Then, locate the air filter box and remove its cover. Finally, all you have to do is slide out the old filter and replace it with the new one.

Posted on 17 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the pollen filter on the Audi A3 8PA
How to replace the pollen filter on the Audi A3 8PA
Audi A3 (2003-2013 / 8P, MK 2) In this video we will see how to replace the cabin filter of the Audi A3 second series, code 8PA. We start by moving the passenger seat all the way b…
How to change the cabin filter in an Audi A3?
How to change the cabin filter in an Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) In this video today we will see how to change the cabin filter in the Audi A3. The procedure is very simple. First, you need to position yourself on …
How to replace the cabin filter in the Audi A3
How to replace the cabin filter in the Audi A3
Audi A3 (2012-2019 / MK 3, 8V) Periodically replacing the cabin air filter inside your Audi A3 third series (year 2012-2019) is very important as it allows you to have optimal air …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos