Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Fuel Flap of the Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Fuel cap

This guide shows you the steps to open the fuel flap and refuel your Audi A3. First, ensure the door locks are unlocked using the remote; then move to the outside and press the left side of the flap to open it, as shown in the video. Next, unscrew the fuel cap counterclockwise to refuel; apply the reverse procedure to close the cap until it clicks, and finally close the flap!

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the fuel door of the Audi A3
How to open the fuel door of the Audi A3
Audi A3 (1996-2003 / MK 1, 8L) .. In this short and simple guide, we will see how to open the fuel flap of the Audi A3, following the instructions below. First, open the front door.. …
How to Open Fuel Flap on Audi A3
How to Open Fuel Flap on Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How to open the fuel flap on an Audi A3? Open the fuel flap located on the left side of the car's body by pressing on it with your finger. Once you l…
How to open the fuel door of the Audi A3
How to open the fuel door of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today we will explain how to open the fuel door of the Audi A3. To perform this operation, first we need to unlock the vehicle by pressing the openin…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos