Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the windshield wiper relay located in the Audi A4?

Model: Audi A4 B5 - Years 1994-2000
Part: Windshield wipers

If the windshield wipers of our Audi A4 have suddenly stopped working, we can first check the condition of the respective relay, whose position is indicated in this video. As shown, the relay in question is located in the box inside the cabin, precisely in the lower area of the dashboard on the driver's side. It is labeled with the code 389 and is the large brown relay located at the far right of the box. If it is faulty, make sure to use a replacement with equivalent specifications and operate with the vehicle turned off to avoid causing any damage.

Posted on 13 January 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front wiper blades on an Audi A4
How to replace the front wiper blades on an Audi A4
Audi A4 (2000-2004 / B6) Let's see in this video how to replace the front wiper blades of an Audi A4. We take the front brush with our hands, pull the brush as in the video (…
Replacement windshield wipers Audi A4 Avant
Replacement windshield wipers Audi A4 Avant
Audi A4 (2004-2008 / B7) In this video we will see how to replace the front wiper blades of the Audi A4 Avant B8. First we go to raise our old brushes: now (depending on the …
Where is the fuse box located in the Audi A4 B5?
Audi A4 (1994-2000 / B5) In the following guide, we will discover where the fuse box is located inside your Audi A4 B5 (year 1994-2000). First, go inside the car and reach th…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos