Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse box diagram of an Audi A5

Model: Audi A5 8T3, 8F, 8T8, 8T - Years 2007-2016
Part: Fuse box

Through this video guide, we can see the position, name, and operating amperage of the fuses and relays in a first generation Audi A5. The first two fuse boxes shown in the video are located inside the vehicle's cabin, with one on the left side and one on the right side of the dashboard behind a removable cover. The third fuse box can be found inside the rear trunk on the passenger side, also behind a removable cover. Finally, the last fuse box shown in the video is located inside the engine compartment on the driver's side.

Posted on 1 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Fuse box and fuse positioning of the Audi A5
Fuse box and fuse positioning of the Audi A5
Audi A5 (2007-2016 / 8T3, 8F, 8T8, 8T) Today we will see the information related to the layout and positioning of the fuse boxes of the Audi A5. First, we open the front door of the vehicl…
Fuse positioning and diagram for the Audi A5.
Fuse positioning and diagram for the Audi A5.
Audi A5 (2007-2016 / 8T3, 8F, 8T8, 8T) The information provided in this guide will show us the positioning and the layout of the fuses of the Audi A5, in simple steps. First, we get on boa…
Fuse box diagram of an Audi A5
Fuse box diagram of an Audi A5
Audi A5 (2007-2016 / 8T3, 8F, 8T8, 8T) Thanks to this very useful video guide, you will be able to see all the fuse schematics of an Audi A5, a specific model registered in the year 2009. …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos