Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Parking Brake Button on a BMW X5

Model: BMW X5 E70 - Years 2007-2013
Part: Push button

Let's see in this video how to disassemble and remove the electric parking brake button located on the center console trim of a BMW X5. Position the gear shift knob vertically, then use a plastic trim tool to remove the center console trim. Next, use a screwdriver to remove the screws securing the panel that includes the brake button, then remove the panel with the button as shown in the video. Finally, install the new brake button kit onto the center console as previously disassembled. Test the proper functioning of the button.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Electronic Parking Brake Button from a BMW X5
BMW X5 (2013-2018 / F15) Let's see how to disassemble and remove the electronic parking brake button located on the center console of a BMW X5. Position the gear shift knob v…
How to Replace the Parking Sensor on the BMW X5
How to Replace the Parking Sensor on the BMW X5
BMW X5 (1999-2006 / E53) Today, you will see in this video tutorial how to remove and replace the parking sensor on the BMW X5 by following these simple and quick steps. Firs…
Replacement of the handbrake button on BMW X5
Replacement of the handbrake button on BMW X5
BMW X5 (2013-2018 / F15) In this very useful video tutorial, we can see how to replace the handbrake button on a BMW X5, third series model produced from 2013 to 2018. So, le…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos