Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the eccentric shaft position sensor of the BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006

Let's discover in this guide the instructions that will allow us to disassemble and replace the eccentric shaft position sensor of the BMW 3 Series, with N42 engine. First, open the car's hood and locate the eccentric shaft position sensor; we see that it is fixed on the sides with screws, which can be unscrewed with a socket wrench, as shown in the video. Disconnect the electrical connector of the sensor first and then remove it, cleaning it or replacing it if necessary with the new original one, following the video tutorial until the end!

Posted on 23 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Camshaft Position Sensor on a BMW 3 Series
How to Replace the Camshaft Position Sensor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, we will look at the instructions that will allow you to remove and replace the camshaft position sensor on a gasoline BMW 3 Series. Fi…
How to Remove the Camshaft Position Sensor on the BMW 3 Series?
How to Remove the Camshaft Position Sensor on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to remove the camshaft position sensor on the BMW 3 Series E90, a very simple operation. First, remove the entire …
How to Test the Camshaft Sensor on a BMW 3 Series?
How to Test the Camshaft Sensor on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To test the camshaft sensor on a BMW 3 Series, completely remove the front part of the car by taking off the bumper for easier access to the engine. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos